Register Now

Swimming Pool Leak Repair Products

LEAKMASTER Flexible Sealer
Your local distributor may have these in stock.

Nitrile rubber-based sealant provides a strong adhesive bond to most any material found around the swimming pool...even vinyl.  Squeeze from the tube directly onto the material to be sealed. Flexible Sealer will skin over in seconds allowing it to be flattened with a wet finger.  Cures and remains flexible in minutes to hours depending on application thickness.

Features

  • Seal vinyl leaks with or without a patch
  • Seal between liner and face plates or fittings
  • Use as thread sealant or seal small suction side plumbing leaks
  • Seal small cracks in gunite or plaster
  • Can be applied underwater
  • Available in blue and white

FS4B Tube of Flexible Sealer - Blue (matches most liners)

FS4W Tube of Flexible Sealer - White


LEAKMASTER Pre-Filled Dye Testers
Your local distributor may have these in stock.

These convenient syringe-style testers are charged with a special concentrated dye that holds together underwater. Six-inch plastic "needle" allows for precise dye placement without creating unwanted currents.

Features

  • Identify the precise location of structural pool leaks
  • Identify water movement into or out of pipes
  • Can be refilled with Leakmaster Dye (available in 8 oz bottles)
  • Available in blue (for light backgrounds) or fluorescent yellow (for dark backgrounds)
DT601 Pre-filled Dye Tester FT601 Pre-filled Dye Tester- Fluorescent
LD601 Re-fill Bottle of Dye FD601 Re-fill Bottle of Dye - Fluorescent

LEAKMASTER Quick Set Approxy Putty
Your local distributor may have these in stock.

Hand-moldable epoxy putty in a convenient "one stick" format hardens above or below water to an "off-white" color. Aggressive adhesiveness and fast 5-minute cure time make Leakmaster Quick Set the logical choice for a multitude of non-cosmetic repairs.

Features

  • Repair cracks in skimmers, main drains and fittings
  • Fill cracks in plaster, gunite, fiberglass, or acrylic
  • Pack around light cable to seal leaking light conduit (permanent)
  • Create a cast around pipe to hold Butyl Tape in place for plumbing leaks

PQ501 Quick Set Putty - Hardens in 5 minutes for repairs that can't wait
PQ512 Quick Set Putty display pack of 12 sticks

LEAKMASTER Pool Repair Putty
Your local distributor may have these in stock.

This convenient and versatile epoxy works underwater and cures to a bright white in 20-60 minutes. One stick format eliminates waste and misproportioning.


PP701 Pool Repair Putty - Hardens in 20-30 minutes to a fiberglass white
PP712 Pool Repair Putty display pack of 12 sticks

LEAKMASTER Butyl Tape
Your local distributor may have these in stock.

Hand-moldable rubber gap filler can be applied underwater without messy caulk guns or mixing. Retains a flexible, tacky consistency making it well suited for a variety of permanent or temporary leak-stopping applications.

Features

  • Pack around light cable to seal or prevent leaking light conduit (removable)
  • Replace rubber gaskets with or without out removing fitting
  • Fill/seal cracks, gaps or voids
  • Hold in place with a cast of Quick Set Epoxy for pipe repairs

BT15 Individually Boxed 15' Roll


A+B Epoxy Putty
Your local distributor may have these in stock.

Two-part, hand-moldable epoxy putty cures in 40-60 minutes to an attractive white. This craftsman quality formulation mixes in your hands to a workable consistency that smoothes and feathers nicely underwater without excessive clouding. A+B is the perfect choice where appearance is important.

Features

  • Fill and repair cracks in plaster, gunite, fiberglass or acrylic
  • Repair cracks in skimmers, main drains and fittings
  • Available in White, Tan, Grey, or Black

Available in 15.5 oz or 7 oz Kits


A+B Fast Epoxy Paste
Your local distributor may have these in stock.

A+B Epoxy Paste spreads easily and is ideal for thin film applications such as tile replacement and hairline crack repairs.  Equal parts from two squeeze tubes are mixed together to produce a paste consitency which allows application to vertical surfaces with no sag or run-off.  Hardens in approximately 5-10 minutes. 

#9915 -  5 oz. Kit of A+B Fast Epoxy Paste