Crack Repair Starter Kit

Everything you need to get started with Low Pressure Crack and Skimmer Injection. Using the materials in this kit you should be able to seal up to 30 feet of cracks or 2-3 skimmers. (see Staple Kit below for cracks requiring structural reinforcement).

• 1 - Jake 300/300/150 manual dispenser
• 3 - Dual Cartridges of #C301D Surface Seal
• 3 - Dual Cartridges of #C102D Injection Foam
• 1 - Syringe Skimmer Port Adhesive
• 3 - 1/4 x 32 Mixer Tubes
• 50 - Surface ports and caps
• 10 - Corner ports and caps
• 4 - Hose assemblies
• 5 - Pair nitrile gloves
• 1 - Plastic trowel and 1 wire brush
• 1 - Instructions
• 1 - Tool box

• Leakmaster Injection Foam
• Leakmaster Surface Seal Epoxy
• Leakmaster Skimmer Port Adhesive