Stair Foam Kit

Support hollow or cracked fiberglass steps by filling the void between the steps and the soil with this rigid foam. Foam expands 7 times its volume so each kit (of 3 tubes) is usually adequate for at least one tread. Simple application involves draining water below the step and drilling 5/16" holes 12" apart over the hollow area, and injecting* the foam into the void through these holes. Foam expands and hardens in about 15-30 minutes. Holes and crack can then be filled with included Plast-Aid or Leakmaster Pool Glue. *Application requires dual cartridge Jake Dispensing Gun #CG300 or a Standard Double Cartridge Gun #CG301. This is available at local building supply store or below.

INCLUDES:

• 3 - 22 oz. Dual Cartridge of #C601D Stair Foam.
• 3 - 1/4" x 32 Mixer Tubes and Nuts.
• 3 - Pair Nitrile Gloves.
• 1 - Plast-Aid 1.5 oz. Kit.
• 1 - Instruction Manual.