Pool Pipe Inspection Camera - 9/16" (14mm) Camera Head, 100' Pushrod Cable

Pipe inspection cameras can be helpful in situations where sonic leak location isn't possible. The ability to provide leak images to customers also increases your credibility and professionalism. This camera features a 9/16" camera head that is designed to navigate multiple 90 degree bends in 1-1/2" pipe. After careful consideration of the many pipe inspection cameras on the market, we have selected to import this model due to its beneficial features for pool use and hard-to-beat price. To learn more about camera use for swimming pool leak detection, check out this blog post.

• 9/16" Diameter Camera Head: Camera head fits into 3/4" conduit and will navigate several 90-degree bends in 1-1/2" pipe (not recommended for plumbing over 2" in diameter)
• Stainless Camera With Sapphire Lens and Ball Guide: Delivers crystal clear images with approximately 8" focus distance
• Build In 512Hz Sonde: Allows camera head to be detected with a standard locator (sold separately)
• 100' of Pushrod: Stored on included spool for eas of use and transportation
• Integrated Distance Counter:Indicates length of camera cable that is inside the pipe
• 7" LCD Screen with Sunshade: Clear picture viewing with 1024 x 600 pixel resolution
• 16MB SD Card: Save and label pictures and video
• Rechargeable High-Capacity Li-Ion Battery: 5 hours of continuous working time
• Rugged and Waterproof Case: Contains spool and holds all electronics and accessories
• Dye Testing Ability Dye test within the pipe by feeding Dye Tester Extension Tubing (sold separately) through the hole in the camera head ball guide

A Note on Maintenance & Repair: Cameras are a useful tool, but are particularly susceptible to damage due to the nature of being pushed and pulled through narrow plumbing. While the camera model we have selected to distribute is tough enough to be pushed through several 90-degree elbows, we recommend using good judgement about how much force to apply. To use less force when maneuvering through fittings, tie a string (or two) to the end of the camera head and pull on it to wiggle the camera head as you push or pull it through fittings. Additionally, for product longevity we recommend leaving the case open after use to let the device completely dry out. This keeps moisture from being trapped in the case and corroding the electronics. Nearly all the repairs work we do on these cameras is due to the use of excessive force or moisture. As such, there is no warranty on this camera, but we do keep a complete selection of replacement parts on hand to provide fast repair service. Please contact us if you have any questions or would like additional usage tips.