Fitting Saver XL
- Product Description
- Media Resources
- Replacement Parts
Repair leaking fittings instantly with the new Fitting Savers!
This extended version provides a means for fixing not just leaks in the fitting but also breaks in the pipe extending up to 12" in from the wall.
Remove eyeball and insert the Fitting Saver into the leaking line. Tighten the hex nut to expand the rubber collar which seals inside the pipe and at the wall fitting.
Once installed a cosmetic face plate hides the rubber seal and nut. Water flow through 3/4" diameter opening bypasses the damaged area when the pool's circulatory system is put back into service.
Works with most Hayward 1022, 1023, 1408 and comparable fittings plumed with 1-1/2" Pipe.
|Proper Inlation Pressure|
|Unlabeled Spec 1|
|Unlabeled Spec 2|
|Unlabeled Spec 3|