{"id":993,"date":"2018-05-07T17:26:59","date_gmt":"2018-05-07T17:26:59","guid":{"rendered":"https:\/\/www.leaktools.com\/blog\/?p=993"},"modified":"2019-02-21T16:07:11","modified_gmt":"2019-02-21T16:07:11","slug":"case-study-leakalyzer-saves-callback","status":"publish","type":"post","link":"https:\/\/www.leaktools.com\/blog\/case-study-leakalyzer-saves-callback\/","title":{"rendered":"Case Study: Leakalyzer Saves Callback"},"content":{"rendered":"

Type of Pool:<\/strong><\/p>\n

Vinyl \/ Indoor<\/p>\n

Equipment Used:<\/strong><\/p>\n

LeakTrac\u00a0 2400<\/a>, Leakalyzer<\/a>, Dye<\/a><\/p>\n

Situation:<\/strong><\/p>\n

Customer told us that pool leaked down to 1\u201d above the skimmer pretty quickly, then seemed to hold at that level.<\/p>\n

Solution:<\/strong><\/p>\n

When we arrived at the job site we started our Leakalyzer<\/a> test with the pump on which confirmed the water loss. After turning the pump off and marking the current test, we could see that the slope of the line continued to be the same as during the pump off test.\u00a0 Because of this we suspected\u00a0a shell leak. Our observations of the pool equipment and plumbing system validated that the plumbing didn\u2019t appear to be the problem.<\/p>\n

\"\"<\/p>\n

Since a shell leak was suspected we began systematically dye testing the pool from the deck. By doing so we were able to find a crack in the skimmer bowl at the same level the customer indicated the pool water level held at. The size of the crack seemed consistent with what the customer and Leakalyzer<\/a> indicated the water loss would be.<\/p>\n