![\"15year2\"](\"https:\/\/www.leaktools.com\/blog\/wp-content\/uploads\/2015\/11\/15year2.jpg\")
<\/a><\/p>\nQuality Pools of Minnesota used Leakmaster\u2122 Injection Foam <\/a>from the Crack Repair Starter Kit\u00a0<\/a> to repair the leaks that extended around the perimeter of the pool.\u00a0 This product was chosen specifically because of its expandable nature.\u00a0 Injection Foam will expand 20 to 30 times its volume and force itself into all sorts of small cracks sealing them off from the backside of the pool.\u00a0 This closed cell foam is water proof and would help seal behind the gasket in spots\u00a0that were not visible from the pool.\u00a0 This added waterproofing was extremely important due to the condo units below.<\/p>\n Small injection holes where drilled at apx. 1 foot intervals through the skimmer blocks. Injection ports <\/a>where than attached to the surface using Leakmaster\u2122 Peel-and-Seal Surface Seal Epoxy<\/a>.\u00a0 Over 5 cases of foam <\/a>was then injected through these ports to fill and seal the void beneath the blocks.\u00a0 Here are a few pictures that demonstrate how the non-water penetrating foam sealed even the smallest and most elusive of holes.<\/p>\n Small hole between skimmer and concrete pool<\/p>\n A series of large and small holes<\/p>\n Another elusive small hole<\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n