Skimmer Injection Steps with Leakmaster Injection Foam

The skimmer injection process with Leakmaster Injection Foam surrounds and supports skimmers by filling the void beneath the skimmer throat. As the foam expands it fills leaks and gaps between the skimmer and pool wall, effectively blocking and preventing leak problems. Skimmer Injection often eliminates the need for more expensive and destructive skimmer replacement.


1. Drill hole through base of skimmer throat, (an extra long 3/16" drill bit is required for this).	2. Use Skimmer Port Adhesive to position Injection Port over hole.	3. Attach mixer and hose to cartridge and attach hose to port. Inject foam into skimmer void.

4. Cap port as foam expands.	5. Foam will expand to fill void and will flow out through leaks..	6. After foam has hardened scrape skimmer surfaces clean with brush. Remove port with putty knife. Seal hole with epoxy putty or remaining Skimmer Port Adhesive.